Standard Wire & Steel Works - Folding Gates Continued

SPECIFICATIONS
Corridor Gate - S (Shallow Recess)

Note: For double gate (pair) of this style gate specify:

a.)	Vertical bars 3/4" x 3/8" x 14 gauge cold rolled channels spaced 6" on center.
b.)	Shears (lattice bars) 5/8" x 3/16" cold rolled flat stock.
c.)	Shears suspended in vertical channels with free floating nylon rollers.
d.)	Fully enclosed cold rolled end bars 1 7/8" x 1 5/8" x 14 gauge (.083)
e.)	Permanent top exposed guide to be 1 7/8" x 1 5/8" x 14 guage fully enclosed fully enclosed type, with one flange cope to allow gate to hinge.
f.)	Guide pins at top of gate to engage ceiling guide.
g.)	Folding bottom track 1 7/8" x 1 5/8" x 14 gauge fully enclosed type, with rubber floor rests.
h.)	Plated washers throughout gate construction.
i.)	Four-wheel ball bearing trucks spaced 3'-0" on center.
j.)	Gate lock to be of self-locking type with heavy bronze tongue and cylinders on both sides of gate.
k.)	Cabinet - 16 gauge sheet steel with 11 gauge cold rolled zee sections frame with continuous hinge on cabinet door.
l.)	Hinging arrangement allows door to be closed and locked when gate is extended into position.

SPECIFICATIONS
Corridor Gate

a.)	Vertical bars 3/4" x 3/8" x 14 gauge cold rolled channels spaced 6" on center.
b.)	Shears (lattice bars) 5/8" x 3/16" cold rolled flat stock.
c.)	Shears suspended in vertical channels with free floating nylon rollers.
d.)	Fully enclosed cold rolled end bars 1 7/8" x 1 5/8" x 14 gauge (.083).
e.)	Permanent top exposed guide to be 1 7/8" x 1 5/8" x 14 gauge fully enclosed type, with one flange cope to allow gate to hinge.
f.)	Guide pins at top of gate to engage ceiling guide.
g.)	Folding bottowm track 1 7/8" x 1 5/8" x 14 gauge fully enclosed type with rubber floor rests
h.)	Plated washers throughout gate construction.
i.)	Four-wheel ball bearing trucks spaced 3'-0 on center.
j.)	Gate lock to be of self-locking type with heavy bronze tongue and cylinders on both sides of gate.